A computational fluid dynamics model was designed to study the problem of thermal processing of a liquid food product containing whey proteins within a heat exchanger consisting of heating, holding and cooling tubular sections. This physical problem is associated with strong coupling between the phenomena of fluid flow, heat transfer, and thermal denaturation-aggregation of whey proteins. Our primary objective was to investigate the two-way coupling between these phenomena within the heat exchanger. This was carried out by analyzing the model predictions of velocity, temperature and product properties at both axial and radial directions. Attention was focussed on the whey proteins present in a cream cheese formulation. The thermal denaturation-aggregation kinetics was supposed to follow that of the beta-lacto-globulin, which plays a major role in fouling when milk derivatives are submitted to thermal processing in heat exchangers. Model predictions demonstrated that the apparent viscosity of the liquid product exhibited a complex behavior along the processing unit: in addition to its dependence on local temperature, it was affected by the local degree of denaturation of whey proteins – and hence on the product history previous to this position in the heat exchanger. The numerical model was structured into a sequence of computational domains; its versatility was illustrated by changing the length of the holding section and then assessing the impact on the final degree of denaturation of the whey proteins present in the liquid product.
Aguiar H, Gut J. Continuous htst pasteurization of liquid foods with plate heat exchangers: Mathematical modeling and experimental validation using a time-temperature integrator. Journal of Food Engineering. 2014. p. 78–86.
2.
Amestoy P, Duff I, L’excellent J, Koster J. A fully asynchronous multifrontal solver using distributed dynamic scheduling. Siam Journal on Matrix Analysis and Applications. 2001. p. 15–41.
3.
Bird R, Stewart W, Lightfoot E. Transport phenomena. john wiley & sons; 2007.
4.
Brodkey R, Lee J, Chase R. A generalized velocity distribution for nonnewtonian fluids. Aiche Journal. 1961. p. 392–3.
5.
Chantoiseau E, Plana-Fattori A, Doursat C, Flick D. Coupling fluid flow, heat transfer and thermal denaturationaggregation of beta-lactoglobulin using an eulerian/lagrangian approach. Journal of Food Engineering. 2012. p. 234–44.
6.
Chhabra R. Heat and mass transfer in rheologically complex systems. In Rheology series. Elsevier; 1999. p. 1435–88.
7.
Coutouly A, Riaublanc A, Axelos M, Gaucher I. Effect of heat treatment, final ph of acidification, and homogenization pressure on the texture properties of cream cheese. Dairy Science & Technology. 2014. p. 125–44.
8.
Datta A, Goode K, Asteriadou K, Robbins P, Fryer P. processes, and equipment. Comprehensive Reviews in Food Science and Food Safety. Comprehensive Reviews in Food Science and Food Safety. 2008. p. 121–43.
9.
Khaldi M, Croguennec T, Andre C, Ronse G, Jimenez M, Bellayer S, et al. Effect of the calcium/protein molar ratio on betalactoglobulin denaturation kinetics and fouling phenomena. International Dairy Journal. 2018. p. 1–10.
10.
Kumar V, Aggarwal M, Nigam K. Mixing in curved tubes. Chemical Engineering Science. 2006. p. 5742–53.
11.
Lalande M, Tissier J, Corrieu G. Fouling of heat-transfer surfaces related to beta-lactoglobulin denaturation during heat processing of milk. Biotechnology Progress. 1985. p. 131–9.
12.
Li L, Singh R, Lee J. Process conditions influence on characteristics of holding tube fouling due to cheese sauce. 2004. p. 565–72.
13.
Luna N, Méndez F, Treviño C. Conjugated heat transfer in circular ducts with a power-law laminar convection fluid flow. International Journal of Heat and Mass Transfer. 2002. p. 655–66.
14.
Lyster R. The denaturation of alpha-lactalbumin and beta-lactoglobulin in heated milk. Journal of Dairy Research. 1970. p. 233–43.
15.
Ndoye F, Erabit N, Alvarez G, Flick D. Influence of whey protein aggregation on the residence time distribution in a tubular heat exchanger and a helical holding tube during heat treatment process. Journal of Food Engineering. 2012. p. 158–67.
16.
Pepper D, Kassab A, Divo E. An introduction to finite element, boundary element, and meshless methods with applications to heat transfer and fluid flow. American Society Of Mechanical Engineers; 2014.
17.
Petit J, Herbig AL, Moreau A, Delaplace G. Influence of calcium on betalactoglobulin denaturation kinetics: Implications in unfolding and aggregation mechanisms. Journal of Dairy Science. 2011. p. 5794–810.
18.
Plana-Fattori A, Chantoiseau E, Doursat C, Flick D. An eulerian-lagrangian approach for coupling fluid flow, heat transfer and liquid food product transformation. Computers & Chemical Engineering. 2013. p. 286–98.
19.
Ramaswamy H, Abdelrahim K, Simpson B, Smith J. Residence time distribution (rtd) in aseptic processing of particulate foods -a review. Food Research International. 1995. p. 291–310.
20.
Swaisgood H. Handbook of milk composition. Elsevier; 1995. p. 464–8.
21.
Tolkach A, Kulozik U. Reaction kinetic pathway of reversible and irreversible thermal denaturation of betalactoglobulin. LAIT. 2007. p. 301–15.
22.
Van Boekel M, Fogliano V, Pellegrini N, Stanton C, Scholz G, Lalljie S, et al. A review on the beneficial aspects of food processing. Molecular Nutrition & Food Research. 2010. p. 1215–47.
23.
Vashisth S, Kumar V, Nigam K. A review on the potential applications of curved geometries in process industry. Industrial & Engineering Chemistry Research. 2008. p. 3291–337.
24.
White F, Corfield I. Viscous fluid flow. McGraw-Hill; 2006.
25.
Zimmerman W. Multiphysics modeling with finite element methods. World Scientific Publishing Company; 2006.
The statements, opinions and data contained in the journal are solely those of the individual authors and contributors and not of the publisher and the editor(s). We stay neutral with regard to jurisdictional claims in published maps and institutional affiliations.
