The influence of plasticizer type (glycerol and sorbitol), its content (starch:plasticizer ratio of 1:0.15; 1:0.20; 1:0.25 and 1:0.30) and the relative humidity conditions (43, 58, 75 and 85%) on the mechanical properties of cassava starch films was studied. Both plasticizers seemed to integrate homogeneously in the film matrix. The incorporation of different concentrations of plasticizers affected the mechanical properties of the cassava starch films. Plasticizer ratio directly influenced the force values of the films, they showed significant flexibility when the plasticizer proportion was increased in the formulation. Under conditions of low relative humidity, sorbitol produced films more resistant to puncture than glycerol. Qualitatively, all the films were less brittle when the plasticizers were incorporated.
Alves V, Mali S, Beleia A, Grossmann M. Effect of glycerol and amylose enrichment on cassava starch film properties. Journal of Food Engineering. 2007;(3):941–6.
2.
Belibi P, Daou T, Ndjaka J, Nsom B, Michelin L, Durand B. A comparative study of some properties of cassava and tree cassava starch films. Physics Procedia. 2014;220–6.
3.
Bergo P, Carvalho R, Sobral P, Santos R, Da Silva F, Prison J, et al. Physical properties of edible films based on cassava starch as affected by the plasticizer concentration. Packaging Technology and Science. 2008;(2):85–9.
4.
Bergo P, Sobral P, Guevara V, Vadala A. Materials Science Forum. 5th International Materials Symposium/14th Conference of the Sociedade-Portuguesade-Materiais. 2010;(2):745–52.
5.
Bergo P, Sobral P, Prison J. Effect of glycerol on physical properties of cassava starch films. Journal of Food Processing and Preservation. 2010;(2):401–10.
6.
Bergo P, Freitas Moraes I, Sobral P. Effects of moisture content on structural and dielectric properties of cassava starch films. Starchstarke. 2012;(10):835–9.
7.
Bonilla J, Atares L, Vargas M, Chiralt A. Properties of wheat starch filmforming dispersions and films as affected by chitosan addition. Journal of Food Engineering. 2013;(3):303–12.
8.
Chang Y, Cheah P, Seow C. Plasticizing-antiplasticizing effects of water on physical properties of tapioca starch films in the glassy state. Journal of Food Science. 2000;(3):445–51.
9.
Chen CH, Lai LS. Mechanical and water vapor barrier properties of tapioca starch/decolorized hsian-tsao leaf gum films in the presence of plasticizer. Food Hydrocolloids. 2008;(8):1584–95.
10.
Chiumarelli M, Hubinger M. Evaluation of edible films and coatings formulated with cassava starch, glycerol, carnauba wax and stearic acid. Food Hydrocolloids. 2014;20–7.
11.
Cuq B, Gontard N, Cuq J, Guilbert S. Selected functional properties of fish myofibrillar protein-based films as affected by hydrophilic plasticizers. Journal of Agricultural and Food Chemistry. 1997;(3):622–6.
12.
Cuq B, Gontard N, Guilbert S. Thermal properties of fish myofibrillar protein-based films as affected by moisture content. Polymer. 1997;(10):2399–405.
13.
Da Matta M, Jr, Sarmento S, Sarantopoulos C, Zocchi S. Barrier properties of films of pea starch associated with xanthan gum and glycerol. Polimeros-Ciencia e Tecnologia. 2011;(1):67–72.
14.
Debeaufort F, Voilley A. Methylcellulose-based edible films and coatings .1. mechanical and thermal properties as a function of plasticizer content. Journal of Agricultural and Food Chemistry. 1997;(3):685–9.
15.
Forssell P, Partanen R, Buleon A, Farhat I, Myllarinen P. Plant biopolymer science: food and nonfood applications. 2002;235–40.
16.
García M, Martino M, Zaritzky N. Plasticized starch-based coatings to improve strawberry (fragaria x ananassa) quality and stability. Journal of Agricultural and Food Chemistry. 1998;(9):3758–67.
17.
Gennadios A, Park H, Weller C. Relative-humidity and temperature effects on tensile-strength of edible protein and cellulose ether films. Transactions of the Asae. 1993;(6):1867–72.
18.
Gontard N, Guilbert S, Cuq J. Water and glycerol as plasticizers affect mechanical and water-vapor barrier properties of an edible wheat gluten film. Journal of Food Science. 1993;(1):206–11.
19.
Gontard N, Ring S. Edible wheat gluten film: influence of water content on glass transition temperature. Journal of Agricultural and Food Chemistry. 1996;(11):3474–8.
20.
Henrique C, Cereda M. Utilization of biofilms in the postharvest conservation of strawberry (fragaria ananassa duch) cv iac campinas. Food Science and Technology. 1999;(2):231–3.
21.
Lazaridou A, Biliaderis C. Thermophysical properties of chitosan, chitosanstarch and chitosan-pullulan films near the glass transition. 2002;(2):179–90.
22.
Liu H, Xie F, Yu L, Chen L, Li L. Thermal processing of starch-based polymers. Progress in Polymer Science. 2009;(12):1348–68.
23.
Lourdin D, Dellavalle G, Colonna P. Influence of amylose content on starch films and foams. Carbohydrate Polymers. 1995;(4):261–70.
24.
Mali S, Grossmann M. Effects of yam starch films on storability and quality of fresh strawberries (fragaria ananassa). Journal of Agricultural and Food Chemistry. 2003;(24):7005–11.
25.
Mali S, Sakanaka L, Yamashita F, Grossmann M. Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect. Carbohydrate Polymers. 2005;(3):283–9.
26.
Maran J, Sivakumar V, Sridhar R, Immanuel V. Development of model for mechanical properties of tapioca starch based edible films. Industrial Crops and Products. 2013;159–68.
27.
Oliveira M, Cereda M. Efeito da película de mandioca na conservaçao de goiabas= the effet of cassava based film on the guavas. Brazilian Journal of Food Technology (Brasil). 1999;(1–2):97–102.
28.
Ollett A, Parker R, Smith A. Deformation and fracture-behavior of wheat-starch plasticized with glucose and water. Journal of Materials Science. 1991;(5):1351–6.
29.
IJFS April. 2015;116–25.
30.
Ramírez M, Satyanarayana K, Iwakiri S, De Muniz G, Tanobe V, Flores-Sahagun T. Study of the properties of biocomposites. part i. cassava starch-green coir fibers from brazil. Carbohydrate Polymers. 2011;(4):1712–22.
31.
Sobral P. Influência da espessura de biofilmes feitos à base de proteínas miofibrilares sobre suas propriedades funcionais. Pesquisa Agropecuária Brasileira. 2000;(6):1251–9.
32.
Sobral P, Menegalli F, Hubinger M, Roques M. Mechanical, water vapor barrier and thermal properties of gelatin based edible films. Food Hydrocolloids. 2001;(4–6):423–32.
33.
Stading M, Rindlav-Westling A, Gatenholm P. Humidity-induced structural transitions in amylose and amylopectin films. Carbohydrate Polymers. 2001;(3):209–17.
34.
Versino F, Garcia A, M. Cassava (manihot esculenta) starch films reinforced with natural fibrous filler. Industrial Crops and Products. 2014;305–14.
35.
Vicentini N, Castro TS, Cereda M. Influência de películas de fécula de mandioca na qualidade pós-colheita de frutos de pimentão (Capsicum annuum L.) Food Science and Technology (Campinas). 1999;127–30.
36.
Vicentini N, Cereda M. Uso de filmes de fécula de mandioca em póscolheita de pepino (cucumis sativus l.). Brazilian Journal of Food Technology. 1999;(1–2):87–90.
37.
Vicentini N, Dupuy N, Leitzelman M, Cereda M, Sobral P. Prediction of cassava starch edible film properties by chemometric analysis of infrared spectra. Spectroscopy Letters. 2005;(6):749–67.
38.
Vicentini N, Sobral P, Cereda M. Plant biopolymer science: food and non-food applications. 2002;291–300.
39.
Zhu F. Composition, structure, physicochemical properties, and modifications of cassava starch. Carbohydrate Polymers. 2014;
The statements, opinions and data contained in the journal are solely those of the individual authors and contributors and not of the publisher and the editor(s). We stay neutral with regard to jurisdictional claims in published maps and institutional affiliations.