Other than the edible oils extracted from the Acrocomia aculeata fruit, there is a growing interest in the palm to generate other high value-added products. Relatively high amounts of carotenoids (up to 378 mg kg-1) have been found in the esculent oils mechanically obtained from the fruit mesocarp. From industrial application perspectives, several processes have been proposed to modify native vegetable oils to yield high functional properties of structured lipids. For interesterified products, the thermal effects of industrial reactors are crucial in reaction mechanisms. The present study has taken into account previously estimated kinetic parameters for the overall disappearances of all-trans β-carotene in the Acrocomia aculeata oil (ko= 2.6 x 10-4 min-1; Ea = 105.0003 kJ mol-1; ΔH = 9.8 x 104 J kg-1) to develop a continuous stirred tank reactor (CSTR) kinetic treatment that obeys first-order kinetics. A system of ordinary dierential equations - mass and energy balances - was solved by the 4th order Runge-Kutta method (GNU Octave software). Under research conditions related to interesterification processing (2 h; 393.15 K), the initial concentration of carotenoids (around 11%) showed no significant decrease. Overall, realistic processing effects and conditions have been assessed, integrating results and knowledge, improving prospects of Acrocomia aculeata as a promising source of high-quality raw material, for producing functional ingredients and food with nutraceutical properties.

One of the main requirements for modern technologies is to expand the range of meat products by creating combined products with a balanced composition of food and biologically active substances. The purpose of the study was to develop a technology for the production of such combined meat products. The research used secondary meat raw materials of the meat processing industry: horse meat, flank and other beef muscle tissue of the second grade, which, after fermentation by a consortium of microorganisms consisting of the following cultures: Lactobacillus bulgaricus, Bifidumbacterium siccum, Staphilococcus carnosus, were used instead of the main meat raw materials in the production of sausages. The following indicators of ready-prepared products were studied: organoleptic properties, chemical, vitamin and mineral composition, toxicity and harmlessness, storage duration. The results showed that the use of this consortium of microorganisms in the production of sausage products made it possible to use secondary collagen-containing raw materials for processing. The positive influence of the proposed biotechnological method of processing meat raw materials on the organoleptic, physical-chemical, structural-mechanical, microbiological characteristics and biological value of the finished product was revealed. It was found that the use of a consortium of microorganisms increased the quality of finished products. In addition, the proposed technology has the potential to reduce the cost of production and increase the share of waste-free production in the meat processing industry.

For the first time in the XXI century, the number of people suffering from obesity worldwide surpassed the number of undernourished people. For many developing countries, this presented a so-called "double burden" of coping for over- and under-nourishment. At a rate of more than 50% of the population in Malaysia being either overweight or obese, the country is facing the most severe dietary crisis in East Asia. Often recognized as one of the healthiest populations worldwide and having a blue zone, Japan has managed to set a yardstick for countries around Asia. Hence the purpose of this study was to uncover the capacity for contribution and successful integration of traditional vegetables into Japanese daily food practices. Semi structured interviews were conducted together with participating observation with key informants to help understand the role of women in preserving and safeguarding traditional vegetables also known as 'sansai' in terms of farming and food preparation. In order to solve the unhealthy eating patterns among Malaysians, it is timely to start appreciating the contributions of the older generation in terms of wild edible usage and preparatory methods which can help alleviate the double burden of malnutrition among the population.

Pasteurized fresh milk requires an accurate estimation of shelf life under various conditions to minimize the risk of spoilage and product losses. Milk samples were stored for 56 h in an oven at 25°C and for 15 days in a refrigerator at 4°C. Samples were analyzed using an electronic nose (e-nose), total bacterial count, titratable acidity and pH to determine the quality of milk. Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) were used to analyze e-nose data of milk stored at 25°C, and 4°C. A clear shift in quality was identified by the e-nose, which also appeared in the total bacterial count after 24 h and 12 days for storage at 25 and 4°C, respectively. On the other hand, titratable acidity exceeded the normal limits of 0.14 % - 0.21 % after 24 h for storage at 25°C (0.247 ± 0.006 %) and after 15 days for storage at 4°C (0.25 ± 0.01 %). If pH was a good indicator of quality for samples stored at 25°C, it showed no clear trends for samples stored at 4°C. Based on the microbial count data and e-nose output, the milk had a shelf life of 0.3 day (i.e. 8 h) when stored at 25°C. Shelf life was extended to 9 days when stored at 4°C.

Due to the high level of antioxidant activity of acorn fruits, they can be used as an ingredient the production of functional foods. The goal of the this research was to partially substitute wheat flour with varying levels (10% - 50% w/w) of debittered acorn flour and to investigate its effects on the rheological characteristics of the dough, total phenolic content (TPC), staling, colour indices and sensory properties of toast bread. The farinograph degree of softening and water absorption of the dough decreased with increasing the acorn flour content, while the stability and time of development of the dough increased. Resistance and extensibility to deformation of the samples respectively increased and decreased compared to those of the control. Toast bread with 30% acorn flour replacement was observed to have lower staling than the control. The highest TPC (9.44 mg GAE/g) and the lowest peroxide value (0.36 m eq O2/kg) were obtained for the bread having 30% acorn flour substitution. Moreover, the breads showed darker crumbs with significantly lower specific loaf volumes. Overall, the bread with 30% of acorn flour substitution showed good rheological, staling properties and reasonable anti-oxidant content compared to the control bread as well as the highest sensorial acceptability.

Membrane process is an intelligent alternative way of concentration, preferably for organic juices rich in thermolabile natural components. The expectation is to scale up the extraction of desired compounds from agro-industrial wastes through modernized concentration method. Recovery of betalains, phenolic, and antioxidant from beetroot peel extracts was accomplished by nanofiltration membrane (NF 200) at a recirculation flow rate (400 L h-1) and feed temperature (30 ºC) under constant transmembrane pressure (40 bar). Characterization of betaxanthin, betacyanin, phenolic, and antioxidant activity by spectrophotometric analysis revealed that the final samples contain these compounds respectively: 202.25±3.26 mg.L-1, 360.07±8.43 mg.L-1, 987.79±19.18 mg.L-1, 642.06±14.78 mg.L-1 (pure water); 206.62±1.37 mg.L-1, 339.72±2.89 mg.L-1, 972.72±47.49 mg.L-1, 745.97±25.45 mg.L-1 (ethanol-water). Final samples exhibit vivid colour and a considerably large amount of desired compounds compared to crude extracts and could have industrial applications.

The present study was conducted to develop non-cereal starch extruded products. The effects of feed moisture (15-21%), temperature (130-170 °C) and screw speed (120-160 rpm) were evaluated on the physical and functional properties of extruded snacks using response surface methodology. Feed moisture and screw speed increased the bulk density and hardness of extruded snacks. Significant decreases in water absorption index and increases in water solubility index were observed with increases in extrusion temperature. The best conditions were determined by numerical optimization. The optimized value for non-cereal snacks for feed moisture is 18.22%, temperature 155.96 °C, screw speed 142.75 rpm and, desirability is 0.75. Verification of results showed decent agreement between the responses of experimental values at certain optimum conditions and the predicted values.

Honey has long been used as a food and has been reported to have potential health benefits. In this work, total phenol content, colour and antioxidant and hepatoprotective activities of honey samples of different floral origins from the State of Hidalgo, Mexico were explored using in vitro assays. Hepatoprotective activity was measured by inhibitition of β-glucuronidase; gastroprotective activity was determined by inhibition of urease; antioxidant activity was evaluated by 2,2'-Azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and 2, 2-diphenyl-1-picrylhydrazyl (DPPH) methods. All the parameters showed significant differences (p<0.05) among honey samples. The total phenolic content ranged from 18.02 to 102.77 mg GAE 100 g-1. The colour ranged from extra light amber to dark amber. Inhibition of β-glucuronidase ranged from 23.70% to 36.00%, while urease inhibition ranged between 7.64% and 63.80%. The antioxidant activity by ABTS was between 44.68 and 441.56 mg AAE 100 g-1, and DPPH showed activities ranging from 35.64 to 573.06 mg AAE 100 g-1. All honey samples contained bioactive compounds and displayed functional properties; therefore, the honeys from this region of Mexico offer attractive characteristics for their potential use in the food industry.

Lactobacillus spp. are lactic acid bacteria which have important implications for the food industry due to their fermentation capacities. The aims of this research were to produce fermented goat milks with Lactobacillus plantarum B7 and Lactobacillus rhamnosus D1, isolated from Brazilian artisanal cheeses, and to evaluate their physico-chemical, microbiological and sensorial qualities during 30 days of storage at 7°C. The goat milks, fermented by B7, D1, co-culture and a Lactobacillus casei Shirota control, possessed acceptable physico-chemical characteristics to meet fermented milk standards established by Brazilian legislation and maintain the viability of Lactobacillus spp. throughout the shelf life of the products. The products were microbiologically safe. D1 fermented goat milk gave higher consumer sensory quality acceptance and purchase intention (p<0.05) than other treatments, thus Lactobacillus rhamnosus D1 is recommended for fermented goat milk production.

The aim of this study was to investigate the influence of raw chicken meat content on the rheological properties and 3D printability of minced meat mixtures using different concentrations of raw and cooked chicken meat. The meat mass contained yolk, crushed ice, lean raw meat and cooked meat with a high concentration of connective tissue. The concentrations of raw meat added to cooked meat as a percentage of the total weight of meat were 0; 30; 40; 50; 60; 70 and 100. To determine the rheological properties, amplitude sweep and frequency sweep were carried out with a Rheostress RS 300 (Thermo Fisher Scientific Inc.). Cubes were printed, and the printability and optical impression were evaluated using grades from 1-5. The results showed that rheological properties had a strong influence on the printability of meat mass and it is necessary for G' (storage modulus) at the LVR (linear viscoelastic region) to be higher than 7000 Pa. The complex viscosity |η*| should be higher than 170 Pa, at a shear stress τ = 10 Pa, and a frequency f = 10 Hz used to guarantee sufficient solidity.