Contents
18.10.2018.
Original scientific paper
Are we doing our homework? An analysis of food engineering education in Brazil
What is the profile of Food Engineering education in Brazil? Are we following the contemporary professional renewal trend? Driven by these questions, the present study analyzed data regarding 21 academic courses, which represent approximately 22% of the total bachelor’s degree in food engineering courses offered in the country. Samples were defined considering a Brazilian annual ranking of undergraduate programs: very good (four stars) and excellent (five stars). Next, information was recovered from both the Brazilian Ministry of Education and institutional homepages of each analyzed program. The results suggest that food engineering programs exhibit relative identity, naturally due to their history and the path of each program and their faculty, shaping particularities in how fields of knowledge are constituted, in addition to their representativeness in the total workload of the program. However, initial analysis is suggestive regarding understanding that Brazil is not properly doing its homework, based on global movement, concerning food engineering education. The need to rethink Brazilian technical education, without culminating in additional workload, is emphasized, not only regarding new materials and technologies for learning and teaching, but also in terms of bringing a human and market approach. The achievement of this complex goal seems to be provided by the encouragement of student associations, transversal learning processes, and learning experiences outside the classroom as a means of improving undergraduate programs and human resources.
Vivian-Lara Lara Silva, Fausto Makishi, Marcus Magossi, Izabel Cristina Freitas Moraes, Carmen Silvia Favaro Trindade, Paulo Jose do Amaral Sobral
01.12.2017.
Professional paper
Estimating the risk of phthalates exposure via tea consumption in general population
Four common phthalic acid esters (PAEs) levels in tea fusions samples prepared from three types of tea bags (green, black and white) of ten commercial brands were extracted from the infusions by a dispersive liquid-liquid micro extraction method and determined by GC-MS.PAEs were not found in white tea samples. Residue levels of total phthalic acid esters (TPAEs) in black and green teas showed no significant difference (median=367.5, Interquartile range=244.7-667.5 and median=381, Interquartile range=188.7-688.2µg/kg respectively). DEHP levels in green teas were significantly higher than those in black teas (Median= 93.5 and 204 respectively). Total phthalate esters (TPAEs) levels in flavored teas were about two-fold higher than in non-flavored teas. The four commercial brands tested contain significant levels of DEHP when compared to other brands. Essential oils and essences that were added to tea for improvement of color and taste could be the main sources of PAEs contamination. If oral absorption of phthalates were assumed to be 100%, the maximum daily exposure levels to TPAEs via tea consumption (due to consumption of 5 cups of tea prepared from the tea containing the highest levels TPAEs) were estimated to be 230e-4 μg/kg bw/Day, which are far lower than the regulation levels set by the expert panels on regularly toxicity.
Mohammad Mehdi Amin, Foruz Rastegari, Parinaz Poursafa, Karim Ebrahim
01.12.2017.
Professional paper
Food oral processing in humans: links between physiological parameters, release of flavour stimuli and flavour perception of food
In humans, food oral processing (FOP) is the first step in the digestive process. It prepares the food for swallowing and to undergo the process of digestion. During chewing, the food is comminuted by the combined action of chewing and saliva to form a bolus. The particle size of the bolus is reduced due to the action of the tongue and the teeth, and the saliva is continuously produced by the salivary glands to humidify and impregnate the food. Saliva lubricates the bolus and enables the cohesion of particles to prepare for swallowing. During food oral processing, the compounds responsible for food flavour and taste are released, leading to the perception of food organoleptic properties and significantly contributing to the consumer’s acceptability of the product. Understanding this process of food breakdown and bolus formation thus appears to be a way to revisit food functional properties. However, this process is extremely complex, and as such, its description necessitates a combination of many quantities from different disciplines, i.e., physics, chemistry, physiology, psychology, behavioural science and food science. It depends, on one hand, on food properties and on the other hand, it depends on oral physiology. However, large inter-individual variability is commonly observed, which has important consequences on flavour release and perception. The challenge for the food industry is to be able to develop food considering this large variability, and sensory and nutritional constraints. This challenge is particularly relevant when specific populations (i.e., elderly, infants or obese subjects) are considered.
Gilles Feron, Christian Salles
18.10.2018.
Original scientific paper
‘Made-in-transit’ yoghurt processing: a review of basic concepts and technological implications
The manufacture of food during distribution, a concept known as “made-in-transit” (MIT) manufacture, has the potential to expand the distribution range, extend shelf-life, and provide the customer with the freshest possible product. Benefits for the manufacturer include maximising throughput while minimising manufacturing space and inventory. This concept is new, with mushrooms being the only MIT food developed so far. The feasibility of developing an MIT product from a fermented food was reviewed using yoghurt as a model system. Through the alteration of some of the yoghurt manufacturing parameters (e.g. milk base formulation, heat treatment, starter culture composition and fermentation temperature) it is possible to develop this form of yoghurt production. A predictive microbiology approach is suitable for predicting the effects of both time and temperature on designing and predicting the fermentation process. This review demonstrates the potential of the MIT concept for a fermented food.
Nor Khaizura Mahmud Ab Rashid, S. H. Flint, O. J. McCarthy, J. S. Palmer, M. Golding, A. Jaworska
18.10.2018.
Original scientific paper
A nutritional evaluation of the berry of a new grape: 'Karaerik' (Vitis vinifera L.)
Grape berries are a good source of nutrients and nutraceuticals and have many benefits for human health. Growing interest in the export potential and consumption of a new grape (cv. Karaerik), cultivated as a table grape in Turkey, encouraged us to profile its major nutrient contents from six different locations. Due to its popularity, the nutritional value of this grape berry needs to be investigated to ascertain its potential economic and health benefits. The most abundant sugars in the grape berry were fructose and glucose (peel/whole fruit; averages 236.57 and 127.87, and 183.36 and 108.60 (g kg-1 fresh weight), respectively), while the major organic acids were tartaric and malic acids (7.17 and 2.81, and 2.61 and 1.76(g kg-1 fresh weight), respectively). Linoleic acid (peel/whole fruit/seed; 37.14, 33.12 and 57.83%, respectively) was the predominant fatty acid, while potassium (peel/whole fruit/seed; 9331.5, 10226.33 and 5354 mg/g dry weight, respectively) was the predominant mineral, followed by phosphorus (1592.8, 2672 and 3072.67) in the berry. Our results demonstrate that the nutrient components and physicochemical parameters varied significantly among the sampling locations. The grape berry contains considerable quantities of potentially beneficial healthy nutrients worthy of further evaluation.
Aynur Kurt, Nesrin Colak, Aydin Sükrü Bengu, Ali Gundoğdu, Erdal Akpınar, Sema Hayirlioglu-Ayaz, Faik Ayaz
18.10.2018.
Original scientific paper
Physicochemical and antioxidant properties of banana varieties and sensorial evaluation of jelly prepared from those varieties available in Sylhet region
The present research aimed to evaluate and compare the antioxidant activity in both pulp and peel and the physicochemical contents in the pulp of four local varieties of banana, i.e. Musa acuminata species named Sagor, Champa, Shail and Bichi, available in Sylhet region of Bangladesh. The antioxidant activity from a methanolic extract of banana peels and pulps was evaluated by determination of total phenolic content and DPPH scavenging activity. The physicochemical contents of banana pulp such as protein, fat, moisture, ash and carbohydrate were also determined. The results showed that the overall antioxidant activity of banana peel was higher than the pulp of banana. The pulp of the Shail variety had the highest antioxidant activity (TPC = 80.14 mg GAE/100 g, DPPH radical scavenging activity =91.37%) among the four varieties. Fat (1.38%) and moisture (76.23%) contents were higher in the pulp of Shail, while protein (1.82%) and carbohydrate (22.71%) contents were higher in the pulp of Bichi. The Champa variety contained higher ash content (1.05%). Among the jellies prepared from those banana varieties, the jelly of the Shail variety showed the highest score for overall acceptance (6.8) whilst the jelly prepared from the Bichi variety showed the highest score for taste (7.75). This may be due to higher carbohydrate content. The study suggests that banana peel could be used in the food industry as a raw material to produce bakery products and in cosmetics and pharmaceutical industries as an antioxidant supplement.
Abdullah A. Sad, M. M. Hoque, Wahidu Zzaman
01.12.2016.
Professional paper
In vitro investigation of antioxidant activities of Launea taraxacifolia and Crassocephalum rubens
Launea taraxacifolia and Crassocephalum rubens are among many wild, underutilized and under cultivated vegetables in Nigeria that are at risk of extinction. Total flavonoid contents (TFC), total phenolic contents (TPC), and antioxidant activities of different concentrations (1-5 mg ml-1) were evaluated; using in vitro assays to assess the scavenging properties of 2, 2-diphenyl-1-picryl hydrazyl (DPPHRSP), nitric oxide (NORSP) and hydroxyl (OHRSP). Phenolic profiles of the alcoholic extracts were characterized using high-performance liquid chromatography techniques. The results revealed higher TFC (mg/100g RE) in aqueous (6.06± 0.02-78.79±0.01) than alcohol extracts (with methanol 0.93±0.01—12.73±0.04, and with ethanol -0.85±0.01-- 7.70±0.03). In a similar trend, OHRSP (%) was higher in aqueous extracts (40.83±0.10--91.74±0.19) than alcoholic extracts (with methanol -11.67±0.3-- 30.83±0.06; and with ethanol -14.42±0.06- 40.27±0.05). TPC (mg/100g GAE) which was higher in alcoholic extracts (with methanol -21.48±0.01--133.20±0.16 and with ethanol -9.45±0.01--59.73±0.02) than aqueous extracts (14.83±0.01--52.64±0.03) was in agreement with the trend observed for NORSP (28.24±0.05-151.76±0.08 for methanolic extracts, 21.99±0.13--49.93±0.04 for ethanolic extracts and 38.47±0.11--86.15±0.05 for aqueous extracts). DPPHRSP was also higher in alcoholic extracts (methanolic -22.81±0.01-48.41±0.05 and ethanolic-- 14.53±0.01-62.68±0.07) than aqueous extracts (13.66±0.13--42.86±0.03). TFC, TPC and antioxidant activities showed concentration dependent increase and strong positive correlation with TFC (r= 0.926 – 0.997and r= 0.432 – 1.000) and TPC (r= 0.825 – 0.999 and r= 0.473 - 0.994) for L. taraxacifolia and C. rubens respectively. Caffeic acid, chlorogenic acid, ellagic acid, quercetin and kaempferol were identified as major phenolic components in the extracts. The vegetables have high antioxidant potential for promoting good health; which could be attributed to the identified phytochemicals in them.
Funmilayo B. Borokini, Lajide Labunmi
01.12.2016.
Professional paper
Extrusion cooking technology: Principal mechanism and effect on direct expanded snacks – An overview
The snack industry is one of the fastest growing food sectors and is an important contributor within the global convenience food market. Nowadays snacks and convenience foods are also consumed regularly in India. Properly designed convenience foods can make an important contribution to nutrition in societies where social changes are altering traditional patterns of food preparation. Extrusion cooking as a popular means of preparing snack foods based on cereals and plant protein foodstuff has elicited considerable interest and attention over the past 30 years. Several studies on the extrusion of cereals and pulses, using various proportions, have been conducted because blends of cereals and pulses produce protein enriched products. Special importance is placed on the physicochemical and chemical modifications of protein, starch and dietary fibre. Extruded products can be categorized for a particular application based on their functional properties such as water absorption and water solubility index, expansion ratio, bulk density and viscosity of the dough.Therefore, the literature was reviewed for effect of extrusion processing on product parameters, and nutritional and anti-nutritional properties of extruded products.
Ajita Tiwari, S. K. JHA
01.12.2016.
Professional paper
Texture analysis of blanched vegetables using high- and low-speed measuring methods
Quality reductions of raw and cooked vegetables are caused by forces generated during industrial high-speed manufacturing. However, the transferability of low-speed texture measurement methods to high speed processes is limited. Therefore, analyses with a low-speed uniaxial compression test (breaking strength σ, breaking strain ε) and a high-speed pendulum test (relative fracture height Δh) at different speeds (3.6, 4.4, 5.3 m s-1) were carried out. Textural values for potatoes, carrots and celeriacs (0 to 25 min cooking time) were recorded to compare the two measurement methods. Furthermore, whether the increase of textural values of blanched vegetables measured with low-speed methods, was also observable with high-speed methods, was also investigated. Low to medium rank correlation coefficients (rS < 0.659) between parameters of the two methods were calculated. In contrast to σ and ε, Δh-values indicate a distinct initial increase as well as textural maxima between 5.0 to 12.5 min cooking time for all tested potato and carrot varieties. On the other hand, most celeriac samples did not exhibit an increase in texture with respect to cooking time. Therefore, a textural analysis at high speeds is necessary for the prediction of textural characteristics of blanched vegetables during high-speed processing in order to reduce quality degradation.
Christian Schmitt, Thomas Friedl, Nadine Mattes, Uwe Grupa, Oliver Hensel
01.12.2016.
Professional paper
Effect of inulin on dough and biscuit quality produced from different flours
One of the methods of improving the nutritional profile of baked-goods is the incorporation of dietary fibre (DF) to the formulation. However, DF retains more water than wheat flour, which affects dough rheological properties and thus the final product quality. Flour is the main ingredient in biscuits and contributes to the baked texture and shape of biscuits. There are large differences in quality among the flours from wheat cultivars and among non-wheat flours used for biscuit production. In previous works, different dietary fibres were tested and inulin was found to have a positive quality effect on biscuits made from an all-purpose wheat flour without the need of introducing significant changes in dough properties. To know whether these results are extended to different types of flours that can be used for biscuit production, this paper aimed to analyse the effects of different levels of inulin incorporation on dough and biscuits quality made from three different wheat flours and one triticale flour. Chemical and physic-chemical characterization of the flour samples was performed and compared (moisture, ashes, gluten, solvent retention capacity (SRC) and protein content). Inulin was incorporated to biscuits formulation in two levels: 6 and 12% (wheat replacement). Dough and biscuits quality was measured by spread rate during baking and biscuit factor, texture and surface colour. Inulin incorporation increased dough spreading and biscuit factor and decreased biscuit hardness. The enhancing effect of inulin was observed in all flour. The results confirmed the effect of inulin on biscuits obtained with all flour assayed, despite the differences in flour quality that was tested.
Maria S. Blanco Canalis, Alberto E. León, Pablo D. Ribotta